[coreboot] [flashrom] r551 - trunk
svn at coreboot.org
svn at coreboot.org
Wed May 27 13:40:08 CEST 2009
Author: hailfinger
Date: 2009-05-27 13:40:08 +0200 (Wed, 27 May 2009)
New Revision: 551
Modified:
trunk/spi.c
trunk/w39v080fa.c
Log:
Use consistent naming for local chip ID variables. Every chip besides
SPI and w39v080fa uses id1/id2 as local variable names to store ID
responses from the flash chip.
This eases grepping a lot. As a bonus, it also frees up some names to be
used as parameters.
Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006 at gmx.net>
Acked-by: Patrick Georgi <patrick.georgi at coresystems.de>
Modified: trunk/spi.c
===================================================================
--- trunk/spi.c 2009-05-26 21:26:23 UTC (rev 550)
+++ trunk/spi.c 2009-05-27 11:40:08 UTC (rev 551)
@@ -150,8 +150,8 @@
static int probe_spi_rdid_generic(struct flashchip *flash, int bytes)
{
unsigned char readarr[4];
- uint32_t manuf_id;
- uint32_t model_id;
+ uint32_t id1;
+ uint32_t id2;
if (spi_rdid(readarr, bytes))
return 0;
@@ -163,21 +163,20 @@
if (readarr[0] == 0x7f) {
if (!oddparity(readarr[1]))
printf_debug("RDID byte 1 parity violation.\n");
- manuf_id = (readarr[0] << 8) | readarr[1];
- model_id = readarr[2];
+ id1 = (readarr[0] << 8) | readarr[1];
+ id2 = readarr[2];
if (bytes > 3) {
- model_id <<= 8;
- model_id |= readarr[3];
+ id2 <<= 8;
+ id2 |= readarr[3];
}
} else {
- manuf_id = readarr[0];
- model_id = (readarr[1] << 8) | readarr[2];
+ id1 = readarr[0];
+ id2 = (readarr[1] << 8) | readarr[2];
}
- printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, manuf_id,
- model_id);
+ printf_debug("%s: id1 0x%02x, id2 0x%02x\n", __FUNCTION__, id1, id2);
- if (manuf_id == flash->manufacture_id && model_id == flash->model_id) {
+ if (id1 == flash->manufacture_id && id2 == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
@@ -187,7 +186,7 @@
}
/* Test if this is a pure vendor match. */
- if (manuf_id == flash->manufacture_id &&
+ if (id1 == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
@@ -221,18 +220,17 @@
int probe_spi_rems(struct flashchip *flash)
{
unsigned char readarr[JEDEC_REMS_INSIZE];
- uint32_t manuf_id, model_id;
+ uint32_t id1, id2;
if (spi_rems(readarr))
return 0;
- manuf_id = readarr[0];
- model_id = readarr[1];
+ id1 = readarr[0];
+ id2 = readarr[1];
- printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, manuf_id,
- model_id);
+ printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
- if (manuf_id == flash->manufacture_id && model_id == flash->model_id) {
+ if (id1 == flash->manufacture_id && id2 == flash->model_id) {
/* Print the status register to tell the
* user about possible write protection.
*/
@@ -242,7 +240,7 @@
}
/* Test if this is a pure vendor match. */
- if (manuf_id == flash->manufacture_id &&
+ if (id1 == flash->manufacture_id &&
GENERIC_DEVICE_ID == flash->model_id)
return 1;
@@ -252,7 +250,7 @@
int probe_spi_res(struct flashchip *flash)
{
unsigned char readarr[3];
- uint32_t model_id;
+ uint32_t id2;
/* Check if RDID was successful and did not return 0xff 0xff 0xff.
* In that case, RES is pointless.
@@ -264,9 +262,9 @@
if (spi_res(readarr))
return 0;
- model_id = readarr[0];
- printf_debug("%s: id 0x%x\n", __FUNCTION__, model_id);
- if (model_id != flash->model_id)
+ id2 = readarr[0];
+ printf_debug("%s: id 0x%x\n", __FUNCTION__, id2);
+ if (id2 != flash->model_id)
return 0;
/* Print the status register to tell the
Modified: trunk/w39v080fa.c
===================================================================
--- trunk/w39v080fa.c 2009-05-26 21:26:23 UTC (rev 550)
+++ trunk/w39v080fa.c 2009-05-27 11:40:08 UTC (rev 551)
@@ -23,7 +23,7 @@
int probe_winbond_fwhub(struct flashchip *flash)
{
chipaddr bios = flash->virtual_memory;
- uint8_t vid, did;
+ uint8_t id1, id2;
/* Product Identification Entry */
chip_writeb(0xAA, bios + 0x5555);
@@ -32,8 +32,8 @@
myusec_delay(10);
/* Read product ID */
- vid = chip_readb(bios);
- did = chip_readb(bios + 0x01);
+ id1 = chip_readb(bios);
+ id2 = chip_readb(bios + 0x01);
/* Product Identifixation Exit */
chip_writeb(0xAA, bios + 0x5555);
@@ -41,9 +41,9 @@
chip_writeb(0xF0, bios + 0x5555);
myusec_delay(10);
- printf_debug("%s: vid 0x%x, did 0x%x\n", __FUNCTION__, vid, did);
+ printf_debug("%s: id1 0x%x, id2 0x%x\n", __FUNCTION__, id1, id2);
- if (vid != flash->manufacture_id || did != flash->model_id)
+ if (id1 != flash->manufacture_id || id2 != flash->model_id)
return 0;
map_flash_registers(flash);
More information about the coreboot
mailing list