[coreboot] [PATCH] move PHY fine tune to devicetree.cb

Stefan Reinauer stefan.reinauer at coresystems.de
Mon Aug 23 09:33:51 CEST 2010

 On 8/23/10 12:24 AM, Carl-Daniel Hailfinger wrote:
> On 22.08.2010 23:41, Patrick Georgi wrote:
>> Am 22.08.2010 23:38, schrieb Stefan Reinauer:
>>> Shouldn't such values rather go into the mainboard specific code (ie an
>>> array in mainboard,c) instead of the device tree?
>> Depends on what we define the purpose of the registers in the devicetree
>> to be.
>> Some of the things we currently stuff in registers might be better put
>> into CMOS ("ide or sata" decisions, for example), so that's a more
>> general question than just for these values.
> If we don't store mainboard specific settings for generic (chipset,
> superio) hardware in the device tree, what settings should be in the
> device tree? None?
higher level information, not just register dumps.

More information about the coreboot mailing list