[coreboot] vga & serial debug support when building grub2 as payload
jstkf2012 at 126.com
jstkf2012 at 126.com
Sun Sep 22 10:20:07 CEST 2013
Hi Maillist,
I am a bios engineer from Byosoft.
Unfortunately, I meet 2 questions about building Grub2 as coreboot's payload.
(1)How can I enable vga support during post?
I have configure the following token:
CONFIG_VGA_ROM_RUN=y
CONFIG_VGA_BIOS=y
CONFIG_VGA_BIOS_ID="8086,0166"
CONFIG_VGA_BIOS_FILE="./src/vbios.bin"
But it seems that it doesn't make sence.Is there something need I to do in Grub2 to support vga.
(2)How can I enable serial prot debug after Grub2 Payload is loaded?
I have add the following to grub.cfg and use "grub-mkimage -c ./grub.cfg ......." to make the Grub2.elf.
serial --speed=115200 --unit=0 --word=8 --parity=no --stop=1
terminal_input --append serial
terminal_output --append serial
But it doesn't work after grub2 payload is called!
I need your great help!
Thanks,
TankTang
jstkf2012 at 126.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20130922/bc33c97d/attachment.html>
More information about the coreboot
mailing list