Search results
Jump to navigation
Jump to search
- ...ect was started as part of clustering research work in the Cluster Reseach Lab at the Advanced Computing Laboratory at Los Alamos National Laboratory unde ...1 KB (174 words) - 13:12, 15 January 2008
- ...080A). This is sufficient to have a fully functional coreboot with FILO or LAB payload, as described below. In order to boot from SATA, we need to use 'linux-as-a-bootloader' (LAB) as a payload. You will need a 1MB ROM chip (thankfully the S2891 comes wit ...10 KB (1,522 words) - 23:22, 18 January 2014
- |USB_comments = Only with FILO, Not Yet With LAB ...2 KB (377 words) - 14:13, 21 April 2010
- |USB_comments = Only with FILO, Not Yet With LAB ...2 KB (403 words) - 15:06, 16 November 2008
- If you used buildrom to get a BIOS image with coreboot + LAB, you'll end up at a linux prompt where you can mount the disks, etc. ...4 KB (716 words) - 17:26, 5 December 2015
- * LAB ? (may need bigger flash) ...4 KB (650 words) - 15:00, 16 November 2008
- Another possible payload is 'linux-as-a-bootloader' (LAB). You will need a 1MB ROM chip (the GA-M57SLI-S4 comes with a 512KB ROM chi ...kconfig-style configuration tool ([[buildrom]]) if you want to use FILO or LAB. This is by far the easiest way to build a ROM image. Continue to the [[#Bu ...31 KB (4,898 words) - 08:37, 30 August 2017
- * Power source for SPI Flash chip, 3.3V. Ideally, we should use a lab Power Supply Unit as it is possible to vary the voltage easily and be sure ...10 KB (1,671 words) - 00:23, 29 July 2017
- ...tell us in advance if you need something on site, we might have it in our lab). ...17 KB (2,573 words) - 15:18, 11 May 2017