Board:asus/a8v-e deluxe

From coreboot
Revision as of 22:00, 5 March 2008 by Uwe (talk | contribs) (More status updates.)
Jump to: navigation, search

The wiki is being retired!

Documentation is now handled by the same processes we use for code: Add something to the Documentation/ directory in the coreboot repo, and it will be rendered to Contributions welcome!

This page describes how to use coreboot on the ASUS A8V-E Deluxe mainboard. It is maintained by Uwe Hermann.


Device/functionality Status Comments
CPU works OK I'm using: CPU model AMD Sempron(tm) Processor 3200+
L1 cache enabled OK CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
L2 cache enabled OK CPU: L2 Cache: 256K (64 bytes/line)
L3 cache enabled N/A
Multiple CPU support N/A
Multi-core support Untested I don't have a multicore CPU to test with.
Hardware virtualization Untested
Dual channel support Untested
ECC support Untested
On-board Hardware
On-board IDE 3.5" WIP Doesn't seem to work, yet.
On-board IDE 2.5" N/A
On-board SATA OK Tested: SATA port 1 (hda in FILO). SATA port 2 doesn't seem to work, yet.
On-board SCSI Unknown
On-board USB OK Tested: USB keyboard on all 8 USB ports.
On-board VGA N/A
On-board Ethernet OK
On-board Audio OK
On-board Modem
On-board FireWire Untested
On-board Smartcard reader N/A
On-board CompactFlash N/A
On-board PCMCIA N/A
On-board Wifi N/A
On-board Bluetooth N/A
On-board SD card reader N/A
Add-on slots/cards
ISA add-on cards N/A
Audio/Modem-Riser (AMR/CNR) cards N/A
PCI add-on cards OK Tested: PCI VGA card in slot 3.
Mini-PCI add-on cards Unknown
Mini-PCI-Express add-on cards Unknown
PCI-X add-on cards Unknown
AGP graphics cards N/A
PCI Express x1 add-on cards OK Tested: PCI Express x1 network card.
PCI Express x2 add-on cards N/A
PCI Express x4 add-on cards N/A
PCI Express x8 add-on cards N/A
PCI Express x16 add-on cards WIP Tested: PCI Express x16 VGA card. Appears in lspci, no further test done so far.
PCI Express x32 add-on cards N/A
HTX add-on cards N/A
Legacy / Super I/O
Floppy Untested
Serial port 1 (COM1) OK
Serial port 2 (COM2) N/A
Parallel port OK Doing modprobe ppdev works fine, but further tests were not performed.
PS/2 keyboard OK
PS/2 mouse OK
Game port Untested
PC speaker OK
DiskOnChip N/A
Trackpoint N/A
Touchpad N/A
Fn Hotkeys N/A
Fingerprint Reader N/A
Docking VGA N/A
Docking LAN N/A
Docking USB N/A
Docking Audio N/A
Docking Displayport N/A
Thinklight N/A
Webcam N/A
Sensors / fan control OK The k8temp module loads fine, the sensors tool outputs the CPU temperature correctly. The w83627ehf module (for various temperatures and fan speeds) works fine. Also, the eeprom and i2c-viapro/i2c-dev modules load fine.
Hardware watchdog
SMBus Unknown
CAN bus N/A
CPU frequency scaling
Other powersaving features
Reboot OK
Poweroff OK
Suspend Unknown
Nonstandard LEDs OK There's a power-on LED on the board PCB, it lights up when the board is powered up.
High precision event timers (HPET) OK The dmesg output has ACPI: HPET id: 0x102282a0 base: 0xfed00000, and hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, and hpet0: 3 32-bit timers, 14318180 Hz, but no further tests were performed so far.
Random number generator (RNG)
Wake on modem ring Untested
Wake on LAN Untested
Wake on keyboard Untested
Wake on mouse Untested
TPM Unknown
Flashrom OK Works fine with the proprietary BIOS, untested in coreboot.


  • AMD K8
  • VIA K8T890
  • VIA VT8237R
  • Winbond W83627EHF

Detailed System Information

lspci -tvnn

-[0000:00]-+-00.0  VIA Technologies, Inc. K8T890 Host Bridge [1106:0238]
           +-00.1  VIA Technologies, Inc. K8T890 Host Bridge [1106:1238]
           +-00.2  VIA Technologies, Inc. K8T890 Host Bridge [1106:2238]
           +-00.3  VIA Technologies, Inc. K8T890 Host Bridge [1106:3238]
           +-00.4  VIA Technologies, Inc. K8T890 Host Bridge [1106:4238]
           +-00.5  VIA Technologies, Inc. K8T890 I/O APIC Interrupt Controller [1106:5238]
           +-00.7  VIA Technologies, Inc. K8T890 Host Bridge [1106:7238]
           +-03.2-[0000:05]----00.0  Marvell Technology Group Ltd. 88E8053 PCI-E Gigabit Ethernet Controller [11ab:4362]
           +-07.0  Marvell Technology Group Ltd. 88W8310 and 88W8000G [Libertas] 802.11g client chipset [11ab:1fa7]
           +-08.0  Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) [104c:8023]
           +-0b.0  ATI Technologies Inc 3D Rage Pro 215GP [1002:4750]
           +-0f.0  VIA Technologies, Inc. VIA VT6420 SATA RAID Controller [1106:3149]
           +-0f.1  VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE [1106:0571]
           +-10.0  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.1  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.2  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.3  VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038]
           +-10.4  VIA Technologies, Inc. USB 2.0 [1106:3104]
           +-11.0  VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South] [1106:3227]
           +-11.5  VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller [1106:3059]
           +-11.6  VIA Technologies, Inc. AC'97 Modem Controller [1106:3068]
           +-18.0  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
           +-18.1  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map [1022:1101]
           +-18.2  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller [1022:1102]
           \-18.3  Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control [1022:1103]

Building coreboot

Currently there is no special target for the ASUS A8V-E Deluxe in coreboot. Instead, we use the ASUS A8V-E SE target.

You have to apply the following patch to svn so the board boots (at least when using a Sempron CPU which doesn't seem to support an LDT frequency of 1000MHz):

Index: src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c
--- src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c     (revision 3127)
+++ src/mainboard/asus/a8v-e_se/cache_as_ram_auto.c     (working copy)
@@ -308,7 +308,7 @@
        needs_reset |= optimize_link_incoherent_ht(sysinfo);

        /* Fixme it assumes that 1000MHz LDT is selected. */
-       needs_reset |= k8t890_early_setup_car(16, 0x6);
+       needs_reset |= k8t890_early_setup_car(16, 0x5);

        if (needs_reset) {
                print_debug("ht reset -\r\n");

Then, place your payload (usually FILO) into /tmp/filo.elf and build coreboot as usual:

$ cd target
$ ./buildtarget asus/a8v-e_se && cd asus/a8v-e_se/asus_a8v-e_se && make

The resulting coreboot.rom (512 KB) can now be flashed on a ROM chip.

Booting coreboot

  • Booting from SATA port 1 works using FILO and this config (I have my root filesystem on /dev/sda2 as viewed from Linux):
 kernel=hda2:/vmlinuz initrd=/initrd.img root=/dev/sda2 console=tty0 console=ttyS0,115200
  • Booting from SATA port 2 doesn't yet work, I'll investigate.
  • Booting from IDE doesn't yet work, I'll investigate.

GNU head This work is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or any later version. This work is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.