Difference between revisions of "Etherboot"
From coreboot
Line 32: | Line 32: | ||
Some input for boot or AUTOBOOT_FILE | Some input for boot or AUTOBOOT_FILE | ||
− | + | boot from BIOS ROM area | |
− | + | 4G-128K | |
− | + | '''''mem@0xfffe0000''''' | |
− | + | 4G-512K | |
− | + | '''''mem@0xfff80000''''' | |
− | + | boot from suse | |
− | + | '''''hda2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/hda2 console=tty0 console=ttyS0,115200''''' | |
− | + | for suse install from CD | |
− | + | '''''hdc:/boot/loader/linux initrd=/boot/loader/initrd ramdisk_size=65536 splash=silent showopts console=tty0 console=ttyS0,115200''''' | |
− | + | boot from RH | |
− | + | for RH install from CD | |
− | + | '''''hdc:/isolinux/vmlinuz initrd=/isolinux/initrd.img expert nofb acpi=off devfs=nomount ramdisk_size=65536 console=ttyS0,115200''''' | |
− | + | for serial ATA support (using port1 and port2 only) | |
− | + | 1) if your kernel think SATA as SCSI | |
− | + | '''''hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/sda2 console=tty0 console=ttyS0,115200''''' 2) if your kernel think SATA as normal IDE | |
− | + | '''''hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/hde2 console=tty0 console=ttyS0,115200''''' | |
− | |||
− | + | for usb support | |
− | + | '''''uda1:/ram0_2.5_2.6.5_k8.2_mydisk7.elf''''' |
Revision as of 19:32, 1 March 2005
Download Etherboot --- Please use 5.2.6
Config changes needed for LinuxBIOS support
src/arch/i386/Config
#CFLAGS+= -DPCBIOS
CFLAGS+= -DCONFIG_X86_64
CFLAGS+= -DLINUXBIOS -DCONFIG_TSC_CURRTICKS -DCONSOLE_SERIAL -DCOMCONSOLE=0x3f8 -DCOMPRESERVE -DCONFIG_PCI_DIRECT -DELF_IMAGE
#enable VGA CFLAGS+= -DCONSOLE_DIRECT_VGA
src/Config
CFLAGS+= -DBOOT_FIRST=BOOT_NIC CFLAGS+= -DBOOT_SECOND=BOOT_DISK
#enable FILO and Keyboard # for direct PC kbd support CFLAGS+= -DCONSOLE_PC_KBD # for FILO support it will make main call pci_init CFLAGS+= -DCONFIG_FILO
src/filo/Config
change you command line as you like
AUTOBOOT_FILE = "hda2:/boot/vmlinuz initrd=/boot/initrd pci=noacpi ro root=/dev/hda2 console=tty0 console=ttyS0,115200"
Some input for boot or AUTOBOOT_FILE
boot from BIOS ROM area 4G-128K mem@0xfffe0000 4G-512K mem@0xfff80000
boot from suse hda2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/hda2 console=tty0 console=ttyS0,115200 for suse install from CD hdc:/boot/loader/linux initrd=/boot/loader/initrd ramdisk_size=65536 splash=silent showopts console=tty0 console=ttyS0,115200
boot from RH for RH install from CD hdc:/isolinux/vmlinuz initrd=/isolinux/initrd.img expert nofb acpi=off devfs=nomount ramdisk_size=65536 console=ttyS0,115200
for serial ATA support (using port1 and port2 only) 1) if your kernel think SATA as SCSI hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/sda2 console=tty0 console=ttyS0,115200 2) if your kernel think SATA as normal IDE hde2:/boot/vmlinuz initrd=/boot/initrd ro root=/dev/hde2 console=tty0 console=ttyS0,115200
for usb support uda1:/ram0_2.5_2.6.5_k8.2_mydisk7.elf