[coreboot-gerrit] New patch to review for coreboot: mainboard/amd/mahogany: Use C89 comments style & remove commented code
HAOUAS Elyes (ehaouas@noos.fr)
gerrit at coreboot.org
Mon Oct 10 21:06:16 CEST 2016
HAOUAS Elyes (ehaouas at noos.fr) just uploaded a new patch set to gerrit, which you can find at https://review.coreboot.org/16971
-gerrit
commit 3c802838195f6447fbe9cb23910b4296424883f9
Author: Elyes HAOUAS <ehaouas at noos.fr>
Date: Mon Oct 10 21:04:55 2016 +0200
mainboard/amd/mahogany: Use C89 comments style & remove commented code
Change-Id: Ife9c0b8a1ab55fe683c88e34239d7f5806e1ff9b
Signed-off-by: Elyes HAOUAS <ehaouas at noos.fr>
---
src/mainboard/amd/mahogany/mainboard.c | 29 -----------------------------
1 file changed, 29 deletions(-)
diff --git a/src/mainboard/amd/mahogany/mainboard.c b/src/mainboard/amd/mahogany/mainboard.c
index 9bf3a67..09a38bd 100644
--- a/src/mainboard/amd/mahogany/mainboard.c
+++ b/src/mainboard/amd/mahogany/mainboard.c
@@ -56,35 +56,6 @@ void set_pcie_reset()
pci_write_config16(sm_dev, 0xA8, word);
}
-#if 0 /* not tested yet */
-/********************************************************
-* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
-* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
-* get the cable type, 40 pin or 80 pin?
-********************************************************/
-static void get_ide_dma66(void)
-{
- u8 byte;
- /*u32 sm_dev, ide_dev; */
- device_t sm_dev, ide_dev;
-
- sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
-
- byte = pci_read_config8(sm_dev, 0xA9);
- byte |= (1 << 5); /* Set Gpio9 as input */
- pci_write_config8(sm_dev, 0xA9, byte);
-
- ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
- byte = pci_read_config8(ide_dev, 0x56);
- byte &= ~(7 << 0);
- if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
- byte |= 2 << 0; /* mode 2 */
- else
- byte |= 5 << 0; /* mode 5 */
- pci_write_config8(ide_dev, 0x56, byte);
-}
-#endif /* get_ide_dma66 */
-
u8 is_dev3_present(void)
{
return 0;
More information about the coreboot-gerrit
mailing list