[coreboot] r966 - coreboot-v3/device
svn at coreboot.org
svn at coreboot.org
Fri Oct 31 18:57:42 CET 2008
Author: myles
Date: 2008-10-31 18:57:42 +0100 (Fri, 31 Oct 2008)
New Revision: 966
Modified:
coreboot-v3/device/device.c
Log:
This patch clarifies comments and changes a little whitespace in device/device.c
Signed-off-by: Myles Watson <mylesgw at gmail.com>
Acked-by: Myles Watson <mylesgw at gmail.com>
Modified: coreboot-v3/device/device.c
===================================================================
--- coreboot-v3/device/device.c 2008-10-31 17:40:01 UTC (rev 965)
+++ coreboot-v3/device/device.c 2008-10-31 17:57:42 UTC (rev 966)
@@ -18,10 +18,10 @@
/*
* (c) 1999--2000 Martin Mares <mj at suse.cz>
*/
-/* lots of mods by ron minnich (rminnich at lanl.gov), with
+/* lots of mods by ron minnich (rminnich at lanl.gov), with
* the final architecture guidance from Tom Merritt (tjm at codegen.com)
- * In particular, we changed from the one-pass original version to
- * Tom's recommended multiple-pass version. I wasn't sure about doing
+ * In particular, we changed from the one-pass original version to
+ * Tom's recommended multiple-pass version. I wasn't sure about doing
* it with multiple passes, until I actually started doing it and saw
* the wisdom of Tom's recommendations ...
*
@@ -67,14 +67,14 @@
static struct device devs[MAX_DEVICES];
/**
- * the number of devices that have been allocated
+ * the number of devices that have been allocated
*/
static int devcnt;
/**
* The device creator.
- *
+ *
* reserves a piece of memory for a device in the tree
*
* @return Pointer to the newly created device structure.
@@ -95,7 +95,7 @@
/**
* The default constructor, which simply sets the ops pointer.
- *
+ *
* Initialize device->ops of a newly allocated device structure.
*
* @param dev Pointer to the newly created device structure.
@@ -136,12 +136,12 @@
}
/**
- * Initialization tasks for the device tree code.
- *
+ * Initialization tasks for the device tree code.
+ *
* Sets up last_dev_p, which used to be done by
- * Fucking Magic (FM) in the config tool. Also, for each of the
- * devices, tries to find the constructor, and from there, the ops,
- * for the device.
+ * Fucking Magic (FM) in the config tool. Also, for each of the
+ * devices, tries to find the constructor, and from there, the ops,
+ * for the device.
*/
void dev_init(void)
{
@@ -152,10 +152,10 @@
c = dev->ops;
if (c)
dev->id = c->id;
- /* note the difference from the constructor function below.
+ /* note the difference from the constructor function below.
* we are not allocating the device here, just setting the id.
* We set the id here because we don't want to set it in the dts
- * as we used to. The user sees none of this work.
+ * as we used to. The user sees none of this work.
*/
if (c)
dev->ops = c;
@@ -165,11 +165,11 @@
}
/**
- * Given a device, find a constructor function and, if found, run it.
- *
+ * Given a device, find a constructor function and, if found, run it.
+ *
* Given a device, use the device id in the device to find a device_operations.
* Call the device_operations->constructor, with itself as
- * a parameter; return the result. If there is no constructor,
+ * a parameter; return the result. If there is no constructor,
* then no constructor is run.
*
* @param dev Pointer to the newly created device structure.
@@ -185,7 +185,7 @@
c = find_device_operations(&dev->id);
printk(BIOS_SPEW, "%s: constructor is %p\n", __func__, c);
-
+
if(c) {
if(c->constructor)
c->constructor(dev, c);
@@ -193,7 +193,7 @@
default_device_constructor(dev, c);
}
else
- printk(BIOS_INFO, "No ops found and no constructor called for %s.\n",
+ printk(BIOS_INFO, "No ops found and no constructor called for %s.\n",
dev_id_string(&dev->id));
}
@@ -290,7 +290,7 @@
int i;
printk(BIOS_SPEW,
"%s: %s(%s) dtsname %s have_resources %d enabled %d\n",
- __func__, bus->dev? bus->dev->dtsname : "NOBUSDEV",
+ __func__, bus->dev? bus->dev->dtsname : "NOBUSDEV",
bus->dev ? dev_path(bus->dev) : "NOBUSDEV",
curdev->dtsname,
curdev->have_resources, curdev->enabled);
@@ -393,7 +393,7 @@
/**
* This function is the guts of the resource allocator.
- *
+ *
* The problem.
* - Allocate resource locations for every device.
* - Don't overlap, and follow the rules of bridges.
@@ -456,7 +456,7 @@
/* Remember we haven't found anything yet. */
resource = 0;
- /* Walk through all the devices on the current bus and
+ /* Walk through all the devices on the current bus and
* compute the addresses.
*/
while ((dev = largest_resource(bus, &resource, type_mask, type))) {
@@ -476,7 +476,7 @@
align = min_align;
}
- /* Propogate the resource alignment to the bridge register */
+ /* Propagate the resource alignment to the bridge register */
if (align > bridge->align) {
bridge->align = align;
}
@@ -552,7 +552,7 @@
static void allocate_vga_resource(void)
{
#warning Modify allocate_vga_resource so it is less PCI centric.
- // FIXME: This function knows too much about PCI stuff,
+ // FIXME: This function knows too much about PCI stuff,
// it should just be an iterator/visitor.
/* FIXME: Handle the VGA palette snooping. */
@@ -653,13 +653,13 @@
}
if (!curdev->ops->phase4_set_resources) {
printk(BIOS_WARNING,
- "%s(%s) ops has no missing phase4_set_resources\n",
+ "%s(%s) ops has no phase4_set_resources\n",
curdev->dtsname, dev_path(curdev));
continue;
}
curdev->ops->phase4_set_resources(curdev);
}
- printk(BIOS_SPEW, "%s(%s) assign_resources, bus %d link: %d\n",
+ printk(BIOS_SPEW, "%s(%s) assign_resources done, bus %d link: %d\n",
bus->dev->dtsname, dev_path(bus->dev), bus->secondary,
bus->link);
}
@@ -700,7 +700,7 @@
dev->ops->phase5_enable_resources(dev);
}
-/**
+/**
* Reset all of the devices on a bus and clear the bus's reset_needed flag.
*
* @param bus Pointer to the bus structure.
@@ -744,7 +744,7 @@
*
* Starting at the first device on the global device link list,
* walk the list and call the device's phase2() method to do
- * early setup.
+ * early setup.
*/
void dev_phase2(void)
{
@@ -755,7 +755,7 @@
for (dev = all_devices; dev; dev = dev->next) {
printk(BIOS_SPEW,
"%s: dev %s: ops %p ops->phase2_fixup %p\n",
- __FUNCTION__, dev->dtsname, dev->ops,
+ __FUNCTION__, dev->dtsname, dev->ops,
dev->ops? dev->ops->phase2_fixup : NULL);
if (dev->ops && dev->ops->phase2_fixup) {
printk(BIOS_SPEW,
@@ -770,7 +770,7 @@
post_code(POST_STAGE2_PHASE2_EXIT);
}
-/**
+/**
* Scan for devices on a bus.
*
* If there are bridges on the bus, recursively scan the buses behind the
@@ -802,7 +802,7 @@
int link;
printk(BIOS_INFO, "%s: scanning %s(%s)\n", __FUNCTION__,
busdevice->dtsname, dev_path(busdevice));
-#warning do we call phase3_enable here.
+#warning do we call phase3_enable here.
new_max = busdevice->ops->phase3_scan(busdevice, max);
do_phase3 = 0;
/* do we *ever* use this path */
@@ -842,7 +842,7 @@
* This function has no idea how to scan and probe buses and devices at all.
* It depends on the bus/device specific scan_bus() method to do it. The
* scan_bus() method also has to create the device structure and attach
- * it to the device tree.
+ * it to the device tree.
*/
void dev_root_phase3(void)
{
@@ -872,7 +872,7 @@
/**
* Configure devices on the device tree.
- *
+ *
* Starting at the root of the device tree, travel it recursively in two
* passes. In the first pass, we compute and allocate resources (ranges)
* required by each device. In the second pass, the resources ranges are
@@ -882,7 +882,7 @@
* at DEVICE_MEM_START and grow downward.
*
* Since the assignment is hierarchical we set the values into the dev_root
- * struct.
+ * struct.
*/
void dev_phase4(void)
{
@@ -913,13 +913,16 @@
root->ops->phase4_read_resources(root);
printk(BIOS_INFO, "Phase 4: Done reading resources.\n");
- /* we have read the resources. We now compute the global allocation of resources.
- * We have to create a root resource for the base of the tree. The root resource should contain the entire
- * address space for IO and MEM resources. The allocation of device resources will be done from this
- * resource address space.
+ /* We have read the resources. We now compute the global allocation of
+ * resources. We have to create a root resource for the base of the
+ * tree. The root resource should contain the entire address space for
+ * IO and MEM resources. The allocation of device resources will be done
+ * from this resource address space.
*/
- /* Allocate a resource from the root device resource pool and initialize the system wide I/O space constraints. */
+ /* Allocate a resource from the root device resource pool and initialize
+ * the system-wide I/O space constraints.
+ */
io = new_resource(root, 0);
io->base = 0x400;
io->size = 0;
@@ -928,8 +931,8 @@
io->limit = 0xffffUL;
io->flags = IORESOURCE_IO;
- /* Allocate a resource from the root device resource pool and initialize the system wide
- * memory resources constraints.
+ /* Allocate a resource from the root device resource pool and initialize
+ * the system-wide memory resources constraints.
*/
mem = new_resource(root, 1);
mem->base = 0;
@@ -945,10 +948,9 @@
compute_allocate_resource(&root->link[0], mem,
IORESOURCE_MEM, IORESOURCE_MEM);
- /* Now we need to adjust the resources. The issue is that mem grows downward.
- io = &root->resource[0];
- mem = &root->resource[1];
-
+ /* Now we need to adjust the resources. The issue is that mem grows
+ * downward.
+ */
/* Make certain the I/O devices are allocated somewhere safe. */
io->base = DEVICE_IO_START;
io->flags |= IORESOURCE_ASSIGNED;
More information about the coreboot
mailing list