[coreboot] Coreboot fails to initialize on ASUS A8V-E SE

Knut Kujat knuku at gap.upv.es
Fri Dec 11 13:39:39 CET 2009


Knut Kujat escribió:
> Rudolf Marek escribió:
>   
>> Hi,
>>
>> Can you test with revision 3593?
>>
>> I think you will need to do - buildtarget stuff ;)
>>
>> Rudolf
>>
>>     
> Hi,
>
> It fails compiling and don't know exactly why:
>
> gcc -m32  -nostdlib -nostartfiles -static -o coreboot -T ldscript.ld crt0.o
> nm -n coreboot | sort > coreboot.map
> objcopy --gap-fill 0xff -O binary coreboot coreboot.strip
> gcc -o buildrom
> /home/knuku/Documents/OldCor/coreboot/coreboot-v2/util/buildrom/buildrom.c
> cp /home/knuku/bios.bin.elf payload
> ./buildrom coreboot.strip coreboot.rom payload 0x20000 0x40000
> coreboot.strip: Value too large for defined data type
> make[1]: *** [coreboot.rom] Error 2
> make[1]: se sale del directorio
> `/home/knuku/Documents/OldCor/coreboot/coreboot-v2/targets/asus/a8v-e_se/asus_a8v-e_se/normal'
> make: *** [normal/coreboot.rom] Error 1
>
> I did:
>
> ./buildtarget asus/a8v-e_se
> cd asus/a8v-e_se
> (set the right path to the payload in Config.lb)
> cd asus_a8v-e_se
> make
>
> I tried with the same payload I did with the newer revisions filo.elf
> and then I tried a already compiled seabios elf.
>
> thx,
> Knut Kujat
>
>
>
>
>   
Hi,

I made it compile and it worked I get till filo payload after that it
stucks because:
Error 18: Selected cylinder exceeds maximum supported by BIOS

but I thing thats a minor problem the most important thing is that the
old revision worked.

thx,
Knut Kujat
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.coreboot.org/pipermail/coreboot/attachments/20091211/7733a301/attachment.html>


More information about the coreboot mailing list