[coreboot] Support for Jasper Forest and Sandy bridge on coreboot
corey.osgood at gmail.com
Mon Mar 28 11:58:21 CEST 2011
Sorry, I don't know the specifics on Sandy Bridge, if CAR from the
Core 2s would work or not. You can take a look at other chipsets in
the coreboot source tree to get an idea of what would be required.
On Mon, Mar 28, 2011 at 5:36 AM, sharib khan <sharib4444 at gmail.com> wrote:
> Thanks for the response Corey.
> It is possible for us to get the boot sequence and other required documents
> for these processors.
> Could you highlight what are the necessary changes required in coreboot
> while integrating a new processor.
> Also with my limited understanding of coreboot as of now I am assuming we
> should be able to use standard linux
> device drivers to support devices on our board. Is that correct?
> Kind Regards,
> On Mon, Mar 28, 2011 at 2:31 PM, Corey Osgood <corey.osgood at gmail.com>
>> Supporting them should be possible, but would require documention from
>> intel that's only available under an RS-NDA.
>> On Mon, Mar 28, 2011 at 4:25 AM, sharib khan <sharib4444 at gmail.com> wrote:
>> > Hi,
>> > I am doing a feasibility study to port coreboot on our new generation
>> > data
>> > processing boards.
>> > We are evaluating on Sandy bridge and Jasper Forest (Intel Processor's).
>> > Could someone explain if it is possible to support these processors on
>> > coreboot.
>> > If yes, what could be the steps required.
>> > Kind Regards,
>> > Sharib
>> > --
>> > coreboot mailing list: coreboot at coreboot.org
>> > http://www.coreboot.org/mailman/listinfo/coreboot
More information about the coreboot