Build error on the EPIA-M
adam at cfar.umd.edu
Sun Feb 27 07:57:00 CET 2005
On Sun, 27 Feb 2005, Adam Talbot wrote:
> On the EPIA-MII the CF is part of the PCMCIA and does not connect to the ide
> bus at any time... So the only way I can get access to the CF is through
> ide-cs. I do have an adaptor on order (CD-IDE) to help with this issue, but
> I would much rather use the onboard CF. The less cables the smaller the
ouh, that's nasty.
yes, via pmcia it is still an ide device..
i guess you can do it either way
a) pcmcia/ide support in kernel and use that (big!) kernel to
boot from that device
b) use ide<cf> adapater and smaller kernel with ide support only.
More information about the coreboot